Harmon Maintenance Plan

Heating and Cooling Inspections, One Flat $170 Annual Fee

Plan Overview

A $170 Annual Plan That Pays for Itself

The most reliable HVAC systems are the ones you maintain regularly. Harmon Heating & Cooling offers a $170 annual maintenance plan covering a full heating inspection and a full cooling inspection — so small problems surface before they become breakdowns.

A maintenance plan is an investment in the life and reliability of your heating and cooling system. Instead of paying for inspections one at a time, you pay $170 a year and your system gets a documented heating inspection and a documented cooling inspection — each one a specific checklist our technicians work through, not a quick look.

You can also explore AC repair or furnace repair if you have a problem that needs attention now.

Flat $170 Per Year

Two Full Inspections

Extends System Life

Armstrong Air Certified

Local to Fishers

Contact Us

Why the Plan Pays Off

Why the Plan Pays for Itself

Bundled, Predictable Cost

At $170 a year, the plan bundles both seasonal inspections into a single predictable cost. Booked separately, two visits of this depth — a full heating checklist including a carbon monoxide test, and a full cooling checklist including subcooling readings and a condensate flush — would run higher.

The Repair You Never Make

The larger saving is the repair you never have to make. Catching a small refrigerant leak, a worn contactor, or a struggling blower motor during a tune-up is the difference between a minor fix and a failed compressor or an early system replacement.

Protects Your System’s Life

HVAC systems last 15–20 years when they're maintained, and 10–12 years when they're neglected. The difference is two annual tune-ups — and that protection is worth far more than the plan's annual fee.

Spring Tune-Up

A spring tune-up catches a slow refrigerant leak or a worn belt before it fails, so your cooling is ready before summer demand arrives.

Fall Tune-Up

A fall tune-up ensures your furnace will start reliably when you need it, and both visits catch electrical and mechanical wear that, if ignored, forces a premature replacement.

Local Presence, Responsive Service

Based in Fishers and serving surrounding communities, we're close when you need us — and we schedule your inspections ahead of each season so you're never caught off guard.

What’s Included

What’s Included in the Plan

Your $170 annual plan covers two visits — one for heating, one for cooling. Each follows a fixed checklist.

Heating Inspection and Maintenance

Inspect the heat exchanger, clean the ignition sensor, check igniter resistance, verify safety controls and confirm temperature rise is within spec, check blower motor amperage and capacitor, confirm electrical connections are operating safely, check filtration, and run an air stream carbon monoxide test.

Cooling Inspection and Maintenance

Clean the condenser coil, check electrical connections, verify capacitor readings, amp check the compressor and condenser fan, record operating pressure, temperature, and subcooling, inspect the compressor contactor, flush the indoor condensate drain, and check filtration.

Seasonal Advice

Our technicians explain what's normal seasonal behavior and what isn't, and help you understand how your system is performing across the year.

Prevention Habits

The Plan Works Best With Prevention

A maintenance plan is more effective when you pair it with good habits between visits.

Change Your Air Filter Monthly

Replace your air filter monthly, or as recommended for your system. A clean filter keeps airflow high and the equipment working less to move the same air.

Keep Outdoor Units Clear

Keep outdoor units clear of leaves, debris, and snow. Blocked airflow around the condenser forces the system to work harder and shortens its life.

Program Your Thermostat Seasonally

Set your thermostat seasonally — 68°F in winter, 78°F in summer when you're away. Small setbacks reduce runtime and wear.

Address Small Problems Quickly

Unusual sounds, reduced cooling, or higher-than-normal bills are signs something needs attention. Catching them early keeps a minor fix from becoming a major one. Our technicians will give you these tips during your inspections, and show you how to spot problems early.

Frequent Questions

Questions About the Plan

The plan is $170 per year and covers a full heating inspection and a full cooling inspection. If you have more than one system, call us at (317) 588-8303 or request a quote and we’ll confirm what your home needs.

Tune-ups are scheduled ahead of each season — cooling in the spring, heating in the fall — so problems surface before you need the system most. We’ll work with you to find dates that fit your schedule.

Call and describe the problem. We’ll get you scheduled, diagnose the issue, and provide a repair estimate before any work starts. Repairs outside the two scheduled inspections are quoted separately.

The plan covers the two scheduled inspections and the checklist work listed above, including a filtration check at each visit. Repairs and component replacements are quoted separately — we’ll walk you through exactly what is and isn’t covered before you sign up.

The plan runs annually. If you move or your needs change, call us and we’ll go over your options and any remaining value on the plan.

A maintenance plan doesn’t cover replacement, but it protects you against premature failure. Regular tune-ups extend system life and catch problems early. If a system is beyond repair, we’ll help you understand replacement options and financing to keep costs manageable.

New systems still benefit from regular maintenance. Most manufacturer warranties expect documented annual service, and the inspections catch installation-related or early-life issues while the equipment is still covered.

The heating inspection covers your furnace or heat pump; the cooling inspection covers your AC or heat pump. If you have more than one system, call us and we’ll confirm what your home needs.
Simple, Flat Pricing

One Flat $170 Annual Fee

The $170 plan is paid annually and covers both seasonal inspections — a full heating checklist and a full cooling checklist. Call us at (317) 588-8303 with any questions about enrolling.

What's Included

  • Scheduled seasonal system inspections
  • Priority scheduling for plan members
  • Residential coverage for homeowners
  • Commercial coverage for light commercial properties
Harmon Heating & Cooling technicians servicing equipment
Financing

Flexible Financing for Fishers, IN Homeowners

A new HVAC system is a real investment, and Harmon Heating & Cooling works with Service Finance to help make that investment manageable. Whether you're replacing an aging furnace before winter or upgrading to a more efficient central AC system, financing options are available so an unexpected repair or planned upgrade doesn't have to wait.

A couple reviewing financing paperwork together at their kitchen counter

Our team can walk you through financing options through Service Finance at the time of your estimate, so you know what to expect before any work begins.

Contact Us to Apply
  • Comfort Now, Pay Over Time

    Don't wait on a failing furnace or AC — get your system installed today and spread the cost into manageable monthly payments.

  • Budget-Friendly Monthly Plans

    Flexible terms keep payments predictable, so a new system fits your budget instead of draining your savings all at once.

  • Afford Higher Efficiency

    Financing makes it easier to step up to a more efficient Armstrong system that lowers your energy bills month after month.

Service Areas for the Plan

Maintenance Plans Throughout Fishers, Westfield, Noblesville & Central Indiana

Harmon Heating & Cooling services maintenance plans across Central Indiana. Fishers is our home base, with Westfield just west, Noblesville north and east, Carmel to the north, and Fortville and Pendleton to the southeast and south. Whether you have a Central AC system, mini-split, heat pump, furnace, or geothermal unit, we'll confirm what your equipment needs when you enroll.

Map of the Harmon Heating & Cooling service area across Fishers and Central Indiana

Additional Communities Served

Don't see your city listed? Harmon Heating & Cooling serves additional communities throughout Central Indiana beyond our primary service area — reach out and we'll let you know if we cover your address.

Related Services

Repair, Maintain, or Replace

The same team that inspects your equipment on the plan also handles repairs and replacements. These are the paths we can walk you through.

Armstrong Air central air conditioning condenser unit
Protect Your System

Enroll in the Maintenance Plan Today

Routine maintenance keeps your system efficient, extends its life, and catches small problems before they become expensive ones. At $170 a year, it's a straightforward way to protect the equipment your home depends on.

Call 317-588-8303 to enroll and schedule your first inspection.

Harmon Heating & Cooling service in Fishers, Indiana

35+ Years of Experience

Locally & Family-Owned

Father & Son Operated

Specialized in Air Quality

Rebates & Financing